Specifications
Di3510 Series/Di3510f Series Multi Function Peripheral Security Kit, Security Target
Copyright
©
2004 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved
57/78
Security
Objective
Security Functional
Requirement
O.ACESS-ADMIN
O.ACCESS-USER-BOX
O.ACCESS-SERVICE
O.I&A-ADMIN
O.I&A-SERVICE
O.I&A-USER
OE.ACCESS-SECURE-PRINT
OE.SECURE-PRINT-QUALITY
FMT_MSA.3
•
•
FMT_MTD.1[1]
•
FMT_MTD.1[2]
•
•
FMT_MTD.1[3]
•
FMT_MTD.1[4]
•
FMT_MTD.1[5]
•
FMT_SMF.1
• • •
•
FMT_SMR.1[1]
•
•
FMT_SMR.1[2]
•
FMT_SMR.1[3]
•
FMT_SMR.1[4]
•
•
FPT_RVM.1* * * * * * *
FPT_SEP.1* * * * * * *
FDP_ACC.1[E]
•
FDP_ACF.1[E]
•
FIA_SOS.1[E]
•
FMT_MSA.3[E]
•
* FPT_RVM.1 and FPT_SEP.1 are the requirements that do not directly relate to the security
objectives ; however, they are applied as requirements that support the functional requirements that
are applied by the related security objectives that are indicated with “*” in the above-mentioned table.
This relationship of support (mutual support) will be described in detail in a later section.
8.2.1.2. Sufficiency
The IT security functional requirements for the security objectives are described as follows.
• O.ACCESS-ADMIN (Management function operated by the administrator)
The security objective regulates access to the management functions provided in the
administrator mode, and the subject that operates each security management function
shall be regulated. For this, the following functional requirements are applied.
The operation setting management of the Access check function is limited to only the
administrator by FMT_MOF.1.
The operation of the changing of the administrator mode password is limited to the
administrator by FMT_MTD.1[1], MFT_SMF.1. The administrator password that is set
is verified by FIA_SOS.1[2] is an 8-digit number. The operation of changing the
administrator mode password is an important operation in security management, and