Service manual

LCT
1-Q-8
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
<Removing the Up/Down Wires>
Wire A
Wire B
Wire C
Wire D
Wire A
Wire B
Wire C
Wire D
FRONT
Up/down shaft
Up/down plate
2.Release the metal
ball to remove wireC.
18.Release the metal-
ball to remove wire A.
4.Release the metal
ba ll to re mo ve wi re D.
16.Release the metal
ball to remove wire B.
14.Release the metal
ball to remove wire A.
7.Release the metal
ball to remove wire C.
9.Release the metal
ball to remove wire D.
12.Release the metal
ball to remove wire B.
11.Remove the E-ring,
then remove the pul-
ley to release wire B.
13.Remove the pulley
to release wire A.
17.Remove the pulley
to release wire A.
15.Remove the E-ring,
then remove the pul-
ley to release wire B.
5.Remove the pulley.
3.Remove the pulley.
1.Remove the E-ring.
6.Remove the E-ring.
8.Remove the pulley.
10.Remove the pulley.