Service manual

LCT
1-Q-9
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
<Installing the Up/Down Wires>
Wire A
Wire B
Wire C
Wire D
Wire A
Wire B
Wire C
Wire D
FRONT
Up/down shaft
Up/down plate
20.Insert wire B in the pulleys,
then attach a metal ball.
7.Insert wire A in the
pulleys, then attach a
metal ball.
15.Insert wire C in the
pulleys, then attach a
metal ball.
12.Insert wire D in the
pulleys, then attach a
metal ball.
10.Insert wire B in the
pulleys, then attach a
metal ball.
13.Insert wire C in the up/
down shaft, attach a pul-
ley, and secure the pulley
with an E-ring.
14.Wind wire C around the
pulley by 6 turns in such a
manner that the wire can
be pulled from over the
pulley.
18.Insert wire C in the
up/ down shaft, attach
a pulley, and secure the
pulley with an E-ring.
19.Wind wire C around
the pulley by 6 turns in
such a manner that the
wire can be pulled from
over the pulley.
Insert wire A in
the up/down
shaft, attach pul-
leys, then pull the
wire A from under
the pulleys.
P
u
l
l
w
i
r
e
B
f
r
o
m
u
n
d
e
r
t
h
e
p
u
l
l
e
y
s
.
2.Insert wire A in the pulleys,
then attach a metal ball.
17.Insert wire D in the pulleys,
then attach a metal ball.
5.Insert wire B in the pulleys,
then attach a metal ball.
6 turns
6 turns
6 turns
6 turns
1.
6.
3.
8.
4.
9.
11.Insert wire D in the up/
down shaft, attach a pul-
ley, and wind wire D
around the pulley by six
turns in such a manner
that the wire can be pulled
from over the pulley.
Insert wire B in the up/down
shaft, attach a pulley, and
secure the pulley with E-
rings.
16.Insert wire D in the
up/ down shaft, attach
a pulley, and wind wire
D around the pulley by
six turns in such a man-
ner that the wire can be
pulled from over the
pulley.