Service manual

FN
1-R-5
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
[8] Removing and Reinstalling the Main
Paper Exit Opening Cover
Caution
:
Make sure that the power cord of the main
body is unplugged from the power outlet.
a. Procedure
(1) Remove the following parts:
• Top cover/1 or optional PI (if installed)
• Top cover/2
• Side cover
• Rear cover
•Main tray
(2) Remove four screws and detach the main paper
exit opening cover.
(3) Reinstall the above parts following the removal
steps in reverse.
[9] Removing and Reinstalling the Book-
let Paper Exit Opening Cover (FN-6
ONLY)
a. Procedure
(1) Remove the booklet tray.
(2) Remove two screws and detach the booklet
paper exit opening cover.
(3) Reinstall the above parts following the removal
steps in reverse.
Screws
Main paper exit opening cover
Screws
Screws
Booklet paper exit opening cover