Service manual

FN
1-R-14
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
(5) Remove the E-ring to remove the shaft, then fold
up the arm and secure it using tape or other
materials.
(6) Remove two screws, and further pull stacker unit
out.
CAUTION:
Place something under the drawn
stacker unit to prevent the FNS from
falling due to the weight of the unit.
(7) Remove two screws. Lift the stacker unit to
detach from the guide rail.
Caution
:
Take care of your posture when servicing
to avoid damage to your back or other
joints.
(8) Reinstall the above parts following the removal
steps in reverse.
CAUTION:
Make sure that the hook in the guide
rail is inserted into the mounting hole
of the stacker unit, and then tighten
the securing screw..
Arm
Shaft
E-ring
Screw
Stacker unit
Support preventing the falling of the FNS
Screw
2
1
1
5
3
3
4
4
1. Guide rail
2. Mounting hole
3. Unit
4. Screws
5. Stacker unit