Service manual

FN
1-R-18
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
(6) Remove four screws. Detach the stapler/R and
the connector (CN180).
CAUTION:
Take care not to damage the stapler
rotation HP PS (PS713) when
removing the stapler/R.
(7) Reinstall the above parts following the removal
steps in reverse.
CAUTION:
When installing the sensor cover of
the stapler/R, take care that the bun-
dled cable does not disturb the sta-
pler rotation HPPS (PS713) and is
not nip by the gears.
2
1
3
4
1. Stapler/R
2. Connector (CN180)
3. Stapler rotation HP PS (PS713)
4. Screw