Service manual

PK
1-T-1
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
PUNCH SECTION
Caution:
The following screws should not be
removed. If you do, punching cannot
be done as designed.
[1] Replacing the Punch unit
Caution:Be sure to unplug the power
cords of the main body and this
machine from the wall outlet.
a. Procedure
(1) Remove the punch scraps box.
(2) Remove the drive board cover by removing one
screw.
Punch unit
Screws that should
not be removed.
Screws that should
not be removed.
Punch scraps box
Screw
Punch drive board cover