Service manual

ADJUSTMENT
2-8
2 ADJUSTMENT
[3] Setting Software DIP Switches
1. Procedure
Bring up the Software DIP SW Setting screen
and set software DIP switches.
For the function of each switch, refer to “list of
Software DIP Switches”.
Step Operation
1
Enter the 25 mode.
2
[Memory setting mode menu Screen]
Select " Software DIP SW setting".
3
[Software DIP SW setting screen]
Select a DIP switch number.
Use the or key or numeric
keys.
To use numeric keys, press the DIP
switch number key at the left before
entering a DIP switch number.
4
Select a bit number of the selected DIP
switch.
Use the or key or numeric
keys.
To use numeric keys, press the bit num-
ber key at the upper center before enter-
ing a DIP switch number.
5
Select ON (=1), or OFF (=0) of the
switch.
Use the or key.
: Sets 1.
: Sets 0.
6
Press the key to return to the
Memory setting mode menu Screen.
1
ON OFF
ON
OFF
RETURN