Service manual

ADJUSTMENT
2-17
2 ADJUSTMENT
*13 Transfer/separation output for recycled paper
These bits are used when "Recycle" is selected
for "Paper type/special size setting" in the key
operator mode.
When "User paper" is selected with these bits,
the transfer/separation output for the user paper
setting made in the 36 mode is applied. When
"No specification" is selected, output data by
destination and paper size (
R
or inch series)
(
Japan
/
R
: 64 g/m
2
standard paper,
Inch area
/
inch: 20 lb standard paper, AB: 80g/m
2
standard
paper
Metric area
/
R
: 80g/m
2
standard paper,
inch: 20lb standard paper) is used.
When humid paper causes uneven image, select
“humid paper 1/2/3”.
*14 Fixing roller initial rotation
Fixing may be insufficient if the temperature of
the place where the machine is installed is low.
To prevent this, increase the warm-up time (fixing
roller initial rotation time) to allow the fixing roller
to be evenly warmed up. This bit specifies the
condition(s) under which initial rotation of the fix-
ing roller is required.
• Low temperature: Initial rotation of the fixing
roller is carried out only under the low temper-
ature condition.
• Low and normal temperatures: Initial rotation
of the fixing roller is carried out under low and
normal temperature conditions.
• Low, normal, and high temperatures: Initial
rotation of the fixing roller is carried out under
low, normal, and high temperature conditions.
*15 Fixing roller initial rotation time setting
This bit sets the maximum time of initial rotation
of the fixing roller.
*16 Message switching
Mode 7-7 7-6 7-5
No specification
000
64 g/m
2
standard paper
(Japan)
001
20 lb standard paper (USA)
010
80g/m
2
standard paper
(Europe)
011
Humid paper 1 (Japan)
100
Humid paper 2 (USA)
101
Humid paper 3 (Europe)
110
User paper
111
Mode 8-3 8-2
Low temperature
00
Low and normal temperature
01
Low, normal, and high tem-
peratures
10
No initial rotation
11
Mode 8-5 8-4
2 minutes (Japan)
00
3 minutes (Inch and Metric series)
01
4 minutes
10
10 minutes
11
Mode 9-3 9-2
Please insert key counter.
00
Please insert copy card.
01
Please insert coin.
10
Please insert key counter.
11