Service manual

ADJUSTMENT
2-21
2 ADJUSTMENT
2. Setting the non-standard size 3. Setting the wide paper
Reference 1:
Each time the current tray size is changed on this
screen, the new setting will be written into the
non-volatile memory.
Step Operation
1 Enter the 25 mode.
2
[Memory setting mode menu Screen]
Select " Tray Size Setting."
3
[Paper size setting mode Screen]
Press the key.
4
[Paper size input Screen]
Press the key for specifying the main
(vertical) scanning direction to highlight
it.
5
Press the or key or numeric
keys to enter the size in the main (verti-
cal)scanning direction. Max. 314 mm
6 Press the key for specifying the sub (hor-
izontal) scanning direction to highlight it.
7
Press the or key or numeric
keys to enter the size in the sub (horizon-
tal) scanning direction. Max. 223
mm(LT-402), 459mm(LT-412)
8
Press the key to finish setting.
To cancel the new setting, press the
key.
Pressing either key will display the Mem-
ory setting mode menu Screen again.
2
Non STD size
OK
CANCEL
Step Operation
1 Enter the 25 mode.
2
[Memory setting mode menu Screen]
Select " Paper size setting."
3
[Paper size setting mode Screen]
Press the key.
4
[Paper size selecting Screen]
Press the or key to select a
wide paper size.
5
key.
6
[Paper size input Screen]
Press the key for specifying the main
(vertical) scanning direction to highlight
it.
7
Press the or key or numeric
keys to enter the size in the main (verti-
cal) scanning direction. Max. 314 mm
8 Press the button for specifying the sub
(horizontal) scanning direction to high-
light it.
9
Press the or key or numeric
keys to enter the size in the sub (horizon-
tal) scanning direction. Max. 223mm(LT-
402), 459mm(LT-412)
10
Press the key to finish setting.
To cancel the new setting, press the
key.
Pressing either key will display the Mem-
ory setting mode menu Screen again.
2
Wide size paper
Input size
OK
CANCEL