Service manual

ADJUSTMENT
2-32
2 ADJUSTMENT
92
Set quantity 11 or more
99999999
All counters are 8-digit
counters.
93
Energized time of power condition 1 Total period of time during
which image control board
is energized. Total period
of time during the opera-
tion of CPU.
94
Energized time of power condition 2 Total period of time during
which remote power sup-
ply 2 is on.
1 is counted per minutes.
95
Unused
96
Energized time of power condition 4 Total period of time during
which remote power sup-
ply 3 is on.
1 is counted per minutes.
97
Time during low power mode Total period of time during
which low power mode is
selected. The count is
incremented by 1 per
minute.
98
Time during WUP Total period of time during
which fixing unit heater is
ON when the fixing is
UNREADY. The count is
incremented by 1 per sec-
ond. Data is output per
minute.
99
Time during front door open Total period of time during
which front door is open.
The count is incremented
by 1 per second. Data is
output per minute.
100
Ope. time in 1 side straight exit Total time from start to end
of printing. The count is
incremented by 1 per sec-
ond. Data is output per
minute. (Halt time caused
by JAM stop, etc. is not
included.)
101
Ope. time in 1 side reverse exit
102
Ope. time in 2 side print
103
Operation time in ADF mode Total operation time of
ADF. The count is incre-
mented by 1 per second.
Data is output per minute.
104
Morning Correction count The count is incremented
by 1 each time correction
is made before starting
work in the morning.
105
Time during APS sensor on Total period of time during
which APS sensor is ON.
The count is incremented
by 1 per second. Data is
output per minute.
106
N of main tray used jobs
Number of jobs
107
N of sub tray used jobs
108
N of stapling folding used jobs
109
N of folding jobs
110
N of ADF NF occurred
NO Item
Maximum
count
Counting condition