Service manual

ADJUSTMENT
2-37
2 ADJUSTMENT
Note:
When DIP switch is set to 3-1-1, SC34, 35, and 36 are not counted.
125 77 13
Clincher/F driving error
126 77 14
Clincher/F driving error
9999
All counters are 4-
digit counters.
127 77 21
Stopper motor drive error
128 77 22
Alignment plate/L drive error
129 77 25
Folding knife motor drive error
130 77 26
Folding conveyance motor drive error
131 77 31
Trimmer conveyance drive error
132 77 32
Trimmer conveyance error
133 77 33
Trimmer rear end stopper drive error
134 77 34
Trimmer rear end release motor driving
error
135 77 35
Trimmer press motor driving error
136 77 36
Trimmer pusher motor driving error
137 77 37
Trimmer holder motor driving error
138 77 41
Sheet feeder up motor driving error /L
139 77 42
Sheet feeder up motor driving error /U
140 77 43
Sheet feeder conveyance driving error
141 77 52
Motor drive error for Z-fold stopper 1
142 77 53
Motor drive error for Z-fold stopper 2
143 77 54
Punch drive motor driving error
144 77 81
Gate motor drive error
145 77 91
Sub-CPU reception error
146 77 92
Main CPU reception error
147 80 1
Printer control initial communication error
148 80 2
Printer control communication error
149 80 3
Operation panel communication error
150 80 1*
Printer control ISW not written
151 80 21
VIF control ISW not written
152 80 30
ISW time-out error
153 80 31
ISW data error
154 80 32
ISW write error
155 80 40
FNS with unwritten ISW
156 80 41
ZU with unwritten ISW
157 90 1
ADU drive serial input error 1
158 90 2
ADU drive serial input error 2
159 92 1
ADU cooling fan lock
NO
Trouble
code
Description
Maximum
count
Remarks