Service manual

ADJUSTMENT
2-45
2 ADJUSTMENT
Reference1:
The digits entered in the data field
of each data item will be shifted to
the left one after another.
Reference2:
When the number of entered digits
exceeds 4 or 8, the leftmost char-
acter will disappear.
Reference3:
Setting the key operator pass-
word, weekly timer password, and
HDD management password to
"0000" allows you to use individual
modes without passwords. That is,
the menu screen of each mode
appears directly without displaying
the password input screen.
[11] Setting the Telephone Number and/or
Fax Number of the Service Center
This function allows you to set the telephone number
and/or fax number of the service center displayed
when a service call occurs. The telephone number
and/or fax number are/is also displayed as the basic
help topic "Contact Number of Service Center" on the
user screen. This function is not related to the RD
mode; the telephone number and/or fax number are/is
just displayed on the screen.
Reference1:
If the length of a telephone or fax
number is shorter than 16 digits,
use a hyphen(s) to make the over-
all length 16 digits.
Reference2:
The entered digits will be shifted to
the left one after another, starting
at the right end.
Step Operation
1
Enter the 25 mode.
2
[Memory setting mode menu Screen]
Select the " Telephone number/FAX
number setting".
3
[Customer support TEL/FAX setting
Screen]
Select "Service center Telephone num-
ber (16 digits)" or "Service center Fax
number (16 digits)".
4
Enter the telephone or fax number using
numeric keys.
5
To set both telephone number and fax
numbers, perform steps 3 and 4 repeat-
edly.
6
Press the key to allow the tele-
phone number and/or fax number to take
effect.
To cancel the telephone number and/or
fax number, press the key.
Pressing either key will display the Mem-
ory setting mode menu Screen again.
7
OK
CANCEL