Service manual

ADJUSTMENT
2-79
2 ADJUSTMENT
1. Stitch and fold stopper adjustment (FN-6
only)
Adjusting the stapling position when stitch and
fold mode.
2. Folding stopper adjustment (FN-6 only)
Adjusting the folding position when stitch and
fold or folding mode.
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Finisher adjustment".
3
[Finisher adjustment mode menu
Screen]
Press " Stitch and fold stopper adj.".
4
[Stitch and Fold stopper adj. Screen]
Press the key.
5
Set paper in the tray, set originals on
RADF, and press the START button.
6
Check the paper center and stapling
position.
Specification:
±
1mm
7
If the stapling position is not within spec-
ification, press the C button while press-
ing the Utility key.
8
[Stitch and Fold stopper adj. Screen]
Press the or key to
select a desired paper size.
9
Enter a value with numeric keys and
press the key.
Setting range: -128 to +127
1 step=0.1 mm
10
Repeat steps 4-9 until the stapling posi-
tion is within specification.
11
Press the key to return to
the Finisher adjustment mode menu
Screen.
6
1
COPY SCREEN
NEXT BACK
SET
RETURN
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Finisher adjustment".
3
[Finisher adjustment mode menu
Screen]
Press " Fold stopper adjustment".
4
[Fold stopper adjustment Screen]
Press the key.
5
Set paper in the tray, set originals on
RADF, and press the START button.
6
Check the paper center and folding posi-
tion.
Specification:
±
1mm
7
If the folding position is not within spec-
ification, press the C button while press-
ing the Utility key.
8
[Fold stopper adjustment Screen]
Press the or key to
select a desired paper size.
9
Enter a value with numeric keys and
press the key.
Setting range: -128 to +127
1 step=0.1 mm
10
Repeat steps 4-9 until the folding posi-
tion is within specification.
11
Press the key to return to
the Finisher adjustment mode menu
Screen.
6
2
COPY SCREEN
NEXT BACK
SET
RETURN