Service manual

ADJUSTMENT
2-80
2 ADJUSTMENT
3. Cover sheet tray size adjustment
(Cover Inserter B only)
This adjustment should be performed when the
cover sheet tray size cannot be detected properly
and when centring adjustment for cover sheet
tray is performed.
4. Punch adjustment (PK-2 only)
This performs the punch horizontal positions and
adjusts punch registration loop amount.
1. Select “ Punch adjustment" on the Finisher
adjustment mode menu Screen to display the
Punch adjustment menu Screen.
2. Punch adjustment includes the following items:
Punch Horizontal position adj.
Punch regist loop adjustment
3. Press the number key corresponding to the item
to be adjusted. The adjustment screen for the
selected adjustment item appears.
4. After adjustment completes, return to the Punch
adjustment menu Screen.
5. Press the key of the Punch adjust-
ment menu to return to the Finisher adjustment
mode menu Screen.
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Finisher adjustment".
3
[Finisher adjustment mode menu
Screen]
Press " Cover sheet tray size adjust-
ment".
4
[Cover sheet tray size adj. Screen]
Press or key to select
the tray to be adjusted.
5
Set a A4R size paper on the cover sheet
tray (upper/lower), press the key
on the LCD. A complete message
appears on the screen.
6
Press the key to return to
the Finisher adjustment mode menu
Screen.
6
3
NEXT BACK
Start
Cover sheet tray
RETURN
5
1
2
RETURN