Service manual

ADJUSTMENT
2-81
2 ADJUSTMENT
(1) Punch horizontal position adjustment
Adjusting the punch horizontal position.
(2) Punch registration loop amount adjustment
Adjusting the registration loop amount for the
reversed paper exit and the ADU paper exit
(straight exit).
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Finisher adjustment".
3
[Finisher adjustment mode menu
Screen]
Press " Punch adjustment".
4
[Punch adjustment menu Screen]
Press " Punch horizontal position
adj.".
5
[Punch Horizontal position adj.]
Press the key.
6
Load papers in the tray, place the original
on RADF, and then press the START but-
ton.
7
If the punch horizontal position is not
appropriate, press the C button while
pressing down the Utility key.
8
[Punch Horizontal position adj.
Screen]
Press the or key to
select a desired paper size.
9
Enter a value with numeric keys and
press the key.
Setting range: -50 to +50
1 step=0.1 mm
10
Repeat steps 5-9 until the punched posi-
tion is within the specification.
11
Press the key to return to the
Punch adjustment menu Screen.
6
5
1
COPY SCREEN
NEXT BACK
SET
RETURN
Step Operation
1
Enter the 36 mode.
2
[Adjustment mode menu Screen]
Press " Finisher adjustment".
3
[Finisher adjustment mode menu
Screen]
Press " Punch adjustment".
4
[Punch adjustment mode Screen]
Press " Punch registration loop
amount adjustment".
5
[Punch Regist Loop adj. Screen]
Press the or key to
select the item to be adjusted.
The screen switches between the
reversed paper exit and ADU paper exit.
6
Press the key.
7
Press the START button to make a copy.
8
Check the punch registration loop
amount.
9
If the punch registration loop amount is
not appropriate, press the C button while
pressing the Utility key.
10
[Punch Regist Loop Adj. Screen]
Enter a value with numeric keys and
press the key.
Setting range: -20 to +20
1 step=0.8 mm
11
Repeat steps 5-10 until the punch regis-
tration loop amount is within the specifi-
cation.
12
Press the key to return to
the Punch adjustment menu Screen.
6
5
7
NEXT BACK
COPY SCREEN
SET
RETURN