Service manual

ADJUSTMENT
2-102
2 ADJUSTMENT
3. LCT up/down plate horizontal adjustment of C-
404
a. Adjustment method
Step Operation
5
Remove three screws to detach the
clutch replacement cover.
6
Remove twelve screws to detach the
rear cover.
7
Loosen two screws and adjust the posi-
tion for each up/down pulley using an
adjustment screw so that the front and
rear of the up/down plate are at the same
height.
8
Fasten two screws securely for each up/
down pulley to fix its position.
9
Install the rear cover, clutch replacement
cover, front cover, and side cover (right).
Clutch
replacement
cover
Screws
Rear cover
Screws
Screws
Screws
Screws
Step Operation
1
Lift the up/down plate up.
2
Open the top cover.
3
Loosen the two screws and adjust the
position using an adjustment screw and
the mark so that the front and rear of the
up/down plate are at same height.
4
Fasten two screws securely
Adjustment
screw
Mark
Up/down plate
Up/down plate
Adjustment screws
Screws
Mark
Screws