Service manual

EXTERNAL SECTION
1-A-1
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
EXTERNAL SECTION
[1] Replacing the Ozone Filter
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Caution:
When replacing the ozone filter, insert
it in the opening in the main body as
far as it will go.
a. Procedure
(1) Loosen two screws to remove the ozone filter
cover.
(2) Replace the ozone filter.
(3) Reinstall the above parts following the removal steps in reverse.
[2] Replacing the Developing Suction Fil-
ter
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Caution:
When replacing the developing suc-
tion filter, insert it in the opening in the
main body as far as it will go.
a. Procedure
(1) Loosen the screw to remove the developing suc-
tion filter cover.
(2) Replace the developing suction filter.
(3) Reinstall the above parts following the removal
steps in reverse.
Caution:
When installing the developing suc-
tion filter, the filter-supporting material
should face the back of the machine.
Screw
Ozone filter cover
Screw
Ozone filter
Ozone filter cover
Developing suction filter cover
Screw
Developing suction filter