Service manual

EXTERNAL SECTION
1-A-4
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
(15) Open the front right door and front left door.
(16) Remove two screws to remove the front right
door hinge (lower) and front right door.
(17) Remove two screws and remove the front left
door hinge (lower) and the front left door.
(18) Reinstall the above parts following the removal
steps in reverse.
[4] Changing the Operation Panel
Attachment Angle and Removing/
Reinstalling
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
a. Procedure
(1) Open the front left door and front right door.
(2) Remove two screws to remove the operation
panel cover (middle).
(3) Remove two screws to unlock the operation
panel.
2
1
5
3
4
5
1. Front right door
2. Front right door hinge (lower)
3. Front left door hinge (lower)
4. Front left door
5. Screws
Operation panel cover (middle)
Screws
Screws
Screws
Attachment holes when changing
the operation panel angle
Operation panel