Service manual

ELECTRIC PARTS LIST
4-28
3 DIS./ASSEMBLY
4 ELECTRIC PARTS LIST
FNS
FNS J71-1
Operating
Front door of FNS or the top cover
of PI has opened while a job is
being processed.
Machine stops immedi-
ately.
Remove the jammed
paper from the FNS
or the main body.
J72-16 PS704 (FNS entrance) does not
turn ON within the predefined time
after PS37 (paper exit) has turned
ON.
J72-17 PS706 (main tray paper exit) does
not turn ON within the predefined
time after PS704 (FNS entrance)
has turned ON.
J72-18 PS705 (stacker entrance) does not
turn ON within the predefined time
after PS704 (FNS entrance) has
turned ON. (Staple mode)
J72-19 PS705 (stacker rotation) does not
turn OFF within the predefined
time after M713 (stacker entrance)
has turned ON.
J72-20 PS706 (main tray paper exit) does
not turn ON within the predefined
time after the paper ejection has
started. (Staple mode)
J72-21 PS706 (main tray paper exit) does
not turn OFF within the predefined
time since it has turned ON. (Staple
mode large-size paper)
J72-23 PS701 (sub-tray paper exit) does
not turn OFF within the predefined
time since it has turned ON. (Sub-
tray paper exit mode)
J72-24 PS726 (folding passage) does not
turn ON within the predefined time
since stapling has completed.
J72-25 PS725 (folding exit) does not turn
ON within the predefined time
since M719 (folding knife) has
turned ON.
J72-26 PS725 (folding exit) does not turn
OFF within the predefined time
since it has turned ON.
J72-27 PS720 (stacker no paper) is turned
OFF when stapling starts.
J72-28 PS705 (stacker entrance) does not
turn OFF within the predefined
time since it has turned ON.
Classification
Jam
Code
Cause Machine response Countermeasure