Service manual

ELECTRIC PARTS LIST
4-29
3 DIS./ASSEMBLY
4 ELECTRIC PARTS LIST
FNS
FNS J72-29
Operating
PS706 (main tray paper exit) does
not turn OFF within the predefined
time since it has turned ON. (non-
stapling mode)
Machine stops immedi-
ately.
Remove the jammed
paper from the FNS
or the main body.
J72-30 PS706 (main tray paper exit) does
not turn OFF within the predefined
time since it has turned ON. (Sta-
ple mode small-size paper)
PI J72-35 PS206 (PI passage /L) does not
turn ON within the predefined time
after MC202 (conveyance MC/L)
has turned ON.
PK J72-43 PS801 (punch HP) does not turn
ON within the predefined time after
M801 (punch) has turned ON.
FNS J72-48 PS726 (folding passage) does not
turn OFF within the predefined
time since it has turned ON.
PI J72-49 PS201 (PI passage /U) does not
turn ON within the predefined time
after MC201 (conveyance MC/U)
has turned ON.
Open the top cover of
PI and remove the
jammed paper.
J72-50 PS704 (FNS entrance) does not
turn ON within the predefined time
after PS201 (PI passage /U) has
turned ON.
J72-51 PS704 (FNS entrance) does not
turn ON within the predefined time
after PS206 (PI passage /L) has
turned ON.
FNS J72-81 PS730 (stapler HP /R) and PS732
(clincher HP /R) do not turn ON
within the predefined time after
M709 (stapler /R) and M710
(clincher /R) have turned ON.
Remove the jammed
paper from the FNS
or the main body.
J72-82 PS731 (stapler HP /F) and PS733
(clincher HP /F) do not turn ON
within the predefined time after
M714 (stapler /F) and M715
(clincher /F) have turned ON.
J72-83 PS730/731 (stapler HP /R, /F) and
PS732/733 (clincher HP /R, /F) do
not turn ON within the predefined
time after M709/714 (stapler/R, /F)
and M710/715 (clincher /R, /F)
have turned ON.
Classification
Jam
Code
Cause Machine response Countermeasure