Service manual

SCANNER SECTION

1-C-6

3 DIS./ASSEMBLY1 DIS./ASSEMBLY

[6] Cleaning the Slit Glass and Platen

Glass

Caution:

Be sure the power cord has been

unplugged from the wall outlet.

(1) Remove the original stopper plates (left and

rear), platen glass, and top cover (right, left, front

center, and rear center). (See "EXTERNAL SEC-

TION.")

(2) Remove two screws to detach the slit glass.

(3) Place the removed slit glass and platen glass on

a rag and clean with drum cleaner and cleaning

pad.

(4) Reinstall the above parts following the removal

steps in reverse.

Screws

Slit glass