Service manual

PAPER FEED UNIT OF TRAY 3
1-K-5
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
<Installing Wires>
2
1
7
5
3
8
9
10
4
3
6
6
5
3
7
4
8
6
5
3
3
3
1. Wire restraining cover
2. Pulley
3. E-ring
4. Drive pulley
5. Wire D (White)
6. Wire C (black)
7. Wire B (white)
8. Wire A (black)
9. Drive pulley holder
10. Up/down plate
6.
Repeat steps 1 to 4 to install wire A
and wire B.
7.
Install the wires A and B from
inside the drive shaft hole, push
in the drive pulley, and secure
with E-ring. Next, install the
drive pulley holder.
1.
Pass wire D through
the up/down plate.
3
.
Pass wire C through
the up/down plate.
5.
Install the wires C and D from
inside the drive shaft hole,
push in the drive pulley, and
secure with E-ring.
2
.
Install the pulley, pass wire
D through the pulley, and
install the wire restraining
cover and E-ring.
4
.
Install the pulley, pass wires
C and D, and install the wire
restraining cover and retain-
ing ring. Wire D must be
inside. Wires must not cross.