Service manual

ADU UNIT
1-N-8
3 DIS./ASSEMBLY1 DIS./ASSEMBLY
(8) Remove the nine screws illustrated from the bot-
tom of the ADU stand.
(9) Remove one screw while holding the ADU bot-
tom plate assembly to remove the paper feed
side open/close wire.
Caution:
Be sure to hold ADU bottom plate
assembly when removing the screws
because the ADU bottom plate
assembly becomes free when the
paper feed side open/close wire is
removed.
(10) Lower the ADU bottom plate assembly straight
down and remove the ADU guide cover.
(11) Clean the ADU paper reverse PS (PS45) and
reverse/exit PS (PS46) with a blower brush.
(12) Reinstall the above parts following the removal
steps in reverse.
Screws
Front
Screws
ADU bottom plate assembly
Paper
exit side
Screws
ADU bottom plate assembly
Open/close wire
ADU bottom plate assembly
ADU guide cover
Reverse/exit PS (PS46)
ADU paper reverse PS (PS45)