Instruction manual

- 25 -
USING THE SOFTWARE – THUMBNAILS
In the “Open the Minolta-RAW File” window, you can perform the different processing to Minolta RAW files
for their white balance/saturation/contrast/sharpness settings.
If you wish to perform the RAW File Processing according to the white
balance/saturation/contrast/sharpness set by the digital camera during recording, skip the Operation 3 and
4, and go to the Operation 5.
3. Select a white balance option to apply from the white balance selection
menu.
4. Adjust the saturation and contrast level with slide bars if necessary, and then
select the sharpness level.
If you select “Setting when recording”, the white
balance set by the digital camera is applied
(including “AUTO” and “CUSTOM”). You can change
the setting intentionally by selecting the different
white balance from that set during recording.
If you check the “Preview” checkbox in the lowerleft
corner of the window, you can execute the real time
reflection of the adjusted contents to preview images
so that you can check finished images.
Slide bar controls are defaulted to the same
saturation/contrast levels set by the digital camera
during recording. The sharpness radio button is also
marked (•) according to the same setting during
recording. If you did not change any settings, these
settings during recording are applied to images.You
can change settings intentionally by operating these
slide bars or radio buttons.
If you check the “Preview” checkbox in the lowerleft
corner of the window, you can execute the real time
reflection of the adjusted contents to preview images
so that you can check finished images.