Instruction manual

105
Pictures are
not sharp.
Make sure the subject is within
the autofocus range (p. 26).
A special situation is pre-
venting the autofocus sys-
tem from focusing (p. 27).
Use the focus-lock function to
focus on an object at the same
distance as the subject (p. 26).
Pictures are
taken indoors
or in low-light
situations with-
out flash.
Slow shutter speeds
result in blurred images
when the camera is hand-
held.
Use a tripod or flash (p. 38).
The subject is beyond the flash range (p.
29).
Move closer to the subject.
Problem Symptom Cause Solution
Focus signal is
red.
While using
flash, the pic-
tures are too
dark.
Subject is too close.
If the camera does not function normally, turn it off, remove and reinsert the battery, or
unplug and reconnect the AC adapter. Always turn the camera off using the main switch
otherwise the memory card may be damaged and camera settings reset.