Instruction manual

20 GETTING UP AND RUNNING
SETTING THE DATE AND TIME
After initially inserting a memory card and charging the battery, the camera’s clock and
calendar must be set. When images are recorded, the image data is saved with the date
and time of recording. The date and time may also have to be set when changing
batteries if the clock and calendar reset. Depending on the region, the menu language
may also have to be set. To change the language, see the camera notes on the following
page.
Turn the camera on by pressing the main
switch near the shutter-release button (1).
The set-date-and-time message
appears on the LCD monitor. Select
“Yes” by pressing the controller.
1
Controller
Set date and time.
No
Yes