Instruction manual

69
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied video cable. The camera is compatible with the NTSC and PAL
standards. The TV-system setting can be checked and set in the setup menu (p. 64).
1. Turn off the television and the camera.
2. Insert the small plug of the video cable into the camera.
3. Plug the other end of the video cable into the video input
terminals on the television.
4. Turn the television on.
5. Change the television to the video channel.
6. Slide the mode switch to the playback position and turn
the camera on. The camera’s monitor will not activate
when the camera is attached to a television. The play-
back-mode display will be visible on the television
screen.
7. View images as described in the playback section.