Instruction Manual

Using the REC Menu (Cont’d)

Adjusting White Balance

- The color tone of your photos will change according to the kind of

light source. While the “AUTO” mode can be used in almost all

instances, you can alter the white balance settings to suit the envi-

ronment and lighting when you take a picture.

- The mode you set is displayed with an icon on the monitor.

1. Select “WHITE BALANCE” and

press right.

2. Use down or up to select the

desired mode, then press either

right or the MENU/SET button. The

setting is completed and you will

return to screen 1.

• If you press left, the selection is

invalidated and you will return to

screen 1.

• To return to normal still-image

shooting, set the mode to “AUTO”.