Instruction manual

102

Setting the Operation Sounds

-You can turn on and off the beeps (sounds made for each type of operation

and warnings), the shutter sound, or the sound effects.

- The default setting is turned “ON” (set to sound).

Using the Set-up Menu (Cont’d)

1. Select “SOUND”, press  and the settings

screen appears. “BEEP” is selected, so

press .

2. Using  or , select “OFF” or “ON” and

press either  or the MENU/SET button. You

will return to screen 1.

• If you press , the setting is invalidated and you

return to screen 1.

3. Returning to screen 1, select “EFFECT”.

Then the shown left (screen 3) appears. After

pressing , use  or  to select “OFF” or

“ON”. Then press either  or the MENU/SET

button and you will return to screen 1.

• If you press , the setting is invalidated and you

return to screen 1.

4. Select “SHUTTER” on screen 1 and then

press . Use  or  to select “ON” or “OFF”,

and then press  or the MENU/SET button.

The settings are complete and you return

to screen 1.

• If you press , the setting will be invalidated

and you will return to screen 1.