Instruction manual

123
Check this: Page
• Battery level too low 19
• Battery inserted incorrectly 19
• AC Adaptor attached incorrectly 22
• Battery level too low 19
• Low ambient temperature 126
• Power supply not on. 26
• SD Memory Card or Memory Stick’s
write protected. 13
• Pictures taken have reached the
maximum number.
→ Erase unwanted pictures. 76,82
• Set to the Self-Timer mode. 43
• Flash being charged. 40
• Subject not in the center 34
• Subject hard to focus 34
• Dirty lens 31
• Incorrect distance from the subject 32
• LCD brightness adjusted incorrectly 57,85
• Finger prints or dirt on the monitor 122
• Set to “Flash off” mode 41
- If the following does not solve your problem, please contact the point of
purchase.
Troubleshooting
Symptom
Power will not turn ON
Power turns OFF right
after turning on
Can’t take a picture
even if pressing the
shutter button
Can’t focus
LCD monitor display
and images are not
clear
Doesn’t Flash
Power
Supply
Shooting
the
pictures