Instruction manual

76
Histogram corrections
Input shadow slider
Input gamma slider
Input highlight slider
Input shadow text box
Input gamma text box
Output shadow slider
Output highlight slider Output shadow text box
Output highlight text box
The color histograms can be displayed with the channel list box or with keyboard shortcuts. While
holding the control key (Windows) or command key (Macintosh), press 0 (zero) to display the
RGB channel, press 1 to display the red channel, 2 to display the green channel, 3 to display the
blue channel.
The histogram can be used to maximize the distribution of the pixels in the image. The highlight
level, shadow level, and gamma can be set manually with the sliders or text boxes.
The input gamma slider defines the mid-tones of the image. Dragging the input gamma slider to
the right will darken the image, and dragging it to the left will brighten it. Similar to the tone-curve
correction described on page 74, the input gamma slider allows the brightness of the image to be
adjusted without loosing image information.
The input highlight slider sets the white level. As the slider is moved to the left, an apparent
increase in contrast can be seen in the displayed image. All pixels to the right of the slider are set
to 255 and any image detail they may contain will be lost. This can be an important tool for
improving copy images of text on a white background. Uneven illumination, or faded or stained
paper can be distracting when copying text or line art. By adjusting the white level, the imperfec-
tions of the white background can be eliminated leaving only the darker text visible.
DIMAGE SCAN DUAL III UTILITY – IMAGE PROCESSING
Input highlight text box