Operator`s manual

Action
Change the setting of the User’s Choice Mode U-13 (Default Auto Exposure Level).
➭
p. 58
Cancel the Auto Exposure Mode and select the Manual Exposure Mode to adjust the
exposure level and obtain a darker image.
➭
p. 41
Press the Exposure Control Key (Darker) as necessary to obtain a darker image.
➭
p. 41
The copier needs more toner.
Press the Auxiliary Toner Replenishing key as many times as required to obtain the
desired image density.
➭
p. 54
The copier needs more toner.
Press the Auxiliary Toner Replenishing key as many times as required to obtain the
desired image density.
➭
p. 54
Replace the Toner Bottle with a new one.
➭
p. 70
Replace the paper.
➭
p. 72
Change the setting of the User’s Choice Mode U-13 (Default Auto Exposure Level).
➭
p. 58
Cancel the Auto Exposure Mode and select the Manual Exposure Mode to adjust the
exposure level and obtain a lighter image.
➭
p. 41
Press the Exposure Control Key (Lighter) as necessary to obtain a lighter image.
➭
p. 41
Wipe the Original Glass clean with a soft dry cloth.
➭
p. 112
Place the original in position so that it is held tightly against the Original Glass.
➭
p. 28
Replace the paper.
➭
p. 72
1. When this Type of Copy is Produced
Chapter 6
Troubleshooting
97