Operator`s manual

Placing Originals
Place the original face down on the Original Glass.
Different methods are used to load the originals depending on the type of
originals and whether the copier is equipped with an Automatic Document
Feeder AF-3 (option).
1139O0050A
Sheet Originals (Standard Size)
Raise the Original Cover.
Place the original face down on
the Original Glass, and align its
rear left corner with the
marker on the Original Width
Scale on the left side of the
platen.
Gently lower the Original Cover.
▼
1
2
1139O0070A
Place the original in the same
way as the sheet originals.
Place a blank sheet of paper of
the same size as the original over
the original. Then, lower the
Original Cover.
Highly Transparent Originals
1
2
If this is not done, the copy
produced may be of very poor
quality.
NOTE
2. Copying Procedure
Chapter 3
Making Copies
28