Specifications

Interleaf EP1052 SWITCHES ON PWBs/TECH. REP. SETTINGS
96.11.01
S-13
1158SBS050302A
2. Tech. Rep. Choice
D This function allows the Tech. Rep. to make various settings and adjustments.
<Setting Procedure>
1. Press “2” from the 10-Keys. (The Zoom Ratio Indicator shows “C.”)
2. Press the number assigned to the desired Tech. Rep. Choice. (The Zoom Ratio Indicator shows “C”
plus the number of the chosen function.)
3. Press the Start key. (The Multi-Copy Display shows the current setting for the chosen function.)
4. Clear the current setting using the Clear key and enter the new setting from the 10-Key Pad.
5. Press the Start key to validate the new setting.
NOTE:
If the setting is illegal, it is not validated and is shown blinking.
<Test Copy>
D A test copy can be made by entering “C” of the Tech. Rep. Choice No., holding down the Stop key and
pressing the Start key.
<Leaving the Function>
D Press the Panel Reset key twice to go back to the Basic screen.
[Service Mode " Tech. Rep. Choice]
Choice No.
Setting (The default is .)
Highlighted
C-1 <Size Counter Counting>
Select the size of the paper to be counted by the Size Counter.
NOTE: See the Count-up Table for details.
Data
Description
(Metric
areas)
No count A3/B4
1
2
Description
(Inch areas)
No count
11” x 17”,
8-1/2” x 14”
A3
11” x 17”
A3/B4/FLS
11” x 17”,
8-1/2” x 14”,
11” x 14”
03
C-2 <Total Counter Counting>
Select the conditions (paper size and 2-sided copying) by which the Total
Counter count is increased.
NOTE: See the Count-up Table for details.
Data
Description
1 count per 1
copy cycle
Multiple count-up
0
2
1
Multiple count-up