Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-16
NOTE
When reinstalling the Separator Guide Plate Unit, press
the parts shown on the left up against the copier frame
(both at front and rear).
13. Remove two screws and the Lever.
14. Snap off one C-clip and remove the Separator Unit.
NOTE
D Please use tweezers when reinstalling the C-clip.
15. Snap off one C-clip and remove the Separator Roll Assy.
16. Remove three screws and the Solenoid Mounting Bracket.