Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-22
(4) Winding of the Scanner Drive Cable
z Remark
Whenever the Scanner Drive Cable has been rewound, be sure to make the ”Adjustment of the Scanner/
Mirrors Carriage Position.” See p. D-60.
Pulley B
Scanner Drive Gear
Pulley A
Pulley C
1. Fit the Pulley to the Scanner Drive Gear using two screws.
2. Wind the shorter length of the Cable 2 turns clockwise
around the Pulley, working from the back to front side.
3. Wind the longer length of the Cable 5-3/4 turns counter-
clockwise around the Pulley, working from the front to back
side. Then, slip the Cable Holding Jig onto the Pulley.