Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-24
(5) Removal of the Scanner
1151D019AA
(6) Cleaning of the Exposure Lamp
1151D021AA
1076D131
9. Fit the Cable into the groove in the Wire Guide and hook
the spring.
10. Remove the wrench and Cable Holding Jig.
1. Turn the Scanner Drive Gear to move the Scanner to the
right-hand side of the copier. Then, remove three screws
and the Scanner.
1. Remove two screws and the Exposure Lamp Terminal.
2. Slide out the Exposure Lamp.
3. Using a soft cloth dampened with alcohol, clean the Lamp
by wiping its surface gently in one direction.
NOTE
When reinstalling the Lamp, use care not to allow the pro-
truding navel of the Lamp to hit against the Lamp Reflector
and that the protruding navel points toward the opening in
the Lamp Reflector.