Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-27
Replacement of the Cleaning Blade
Applying Toner to Cleaning Blade
Apply toner to the entire surface of the Cleaning Blade. (Do not forget to coat the surfaces on both ends.)
Turn the PC Drum 1/2 turns backward, then turn it one complete turn forward.
Apply a thin coat of toner to the PC Drum.
Install the PC Drum.
7. Remove two screws and the Lid.
8. Remove the spring.
9. Remove two screws, one spring, one cap and the Cleaning
Blade. Replace it with a new one.
NOTE
When the Cleaning Blade has been replaced, apply toner
to the entire surface of the new Cleaning Blade.