Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-31
1151D036AA
3. Go to the rear of the copier and unplug the connector of
Edge Erase Lamp.
4. Remove the Imaging Unit.
5. Remove one screw and the Edge Erase Lamp.
NOTE
When removing the Erase Lamp, use care not to lose the
pressure spring in the rear.
6. Using a brush or a soft cloth dampened with alcohol, clean
the Erase Lamp.
NOTE
After the Erase Lamp has been cleaned, make the “Adjust-
ment of the Edge Erase Lamp Position.” See p. D-59.