Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-34
(6) Cleaning of the Lower Pre-Image Transfer Guide Plate
(7) Replacement of the Ozone Filter
1151D045AA
1158SBD0208A
2-8. Fusing Unit
(1) Removal of the Fusing Unit
1151D038AA
1151D007AA
1151D008AA
1. Using a brush, whisk dust off the Lower Pre-Image Trans-
fer Guide Plate.
1. Press the Filter Cover Bracket in the direction of the arrows
and pull it off.
2. Remove the Filter and replace it with a new one.
1. Remove one screw and the Ground Wire of the Fusing
Unit.
2. Unplug the Fusing Heater Lamp connector and remove
the wires from the clamp.
3. Unplug the Fusing Thermistor connector and remove the
wires from the two clamps.