Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-43
(1) Adjustment of Front Door Interlock Switch S21
1. Open the Right Door.
2. Remove the Middle Right Cover. (4 screws)
3. Remove the Upper Right Cover. (2 screws)
4. Remove the Right Cover. (2 screws)
5. Swing down the Front Door.
6. Remove the I/U Lock Lever. (1 screw)
7. Remove the Interlock Switch Cover. (2 screws)
8. Loosen the two screws that secure Front Door Interlock
Switch S21. Move S21 as far toward the front side of the
copier as it will go and temporarily secure it in position.
9. Gently swing the Front Door closed and then tighten the
two S21 mounting screws to specification.
D The Switch is wired for the NO type.