Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-48
(3) Adjustment of the Optimum Exposure Setting in the Auto Mode
z Important
D This adjustment must be made after the optimum exposure setting in the Manual Mode has been ad-
justed.
NOTE
Pressing the Start Key lets the copier make the adjustment of optimum exposure setting.
During the adjustment, the Start Key is lit up orange. It turns to green as soon as the adjustment is com-
pleted. (It takes about 5 sec. to make the adjustment.) The Full Size Key can be used to alternately dis-
play on the Magnification Ratio Indicator either the adjusting value (AE Sensor memory level) or the
voltage value (AE Sensor output).
1. Place about five sheets of A3 or 11” 17” paper on the
Original Glass and lower the Original Cover.
2. On the control panel, press the Stop Key, Multi-Copy Key
“0,” Stop Key, and Multi-Copy Key “1,” in that order, to set
the copier into a state ready to enter a particular Tech. Rep.
Mode.
3. Press Multi-Copy Keys “1” and “5” to set the copier into the
F5 Test Mode. (At this time, the Multi-Copy Display shows
“F5.”)
4. Press the Start Key to let the copier make the adjustment.
5. After the adjustment has been made, press the Panel Re-
set Key twice (or turn OFF the Power Switch) to return the
copier back into the normal mode.