Specifications

Interleaf EP1052 DIS/REASSEMBLY, ADJUSTMENT
96.11.01
D-58
6. Press the Clear Key to clear the current setting value.
7. With the old setting value used as reference, enter the new
setting value using the appropriate Multi-Copy Keys.
NOTE
If the erase width on the copy is less than 0.5 mm,
increase the setting value.
If the erase width on the copy exceeds 6.5 mm,
decrease the setting value.
8. Press the Start Key to validate the setting.
9. Press the Panel Reset Key twice (or turn OFF the Power
Switch) to return the copier back to the normal mode.
10. Make two single copies and check for leading edge erase
width on the second copy. (If it does not meet the require-
ment, perform steps 3 through 9 again.)