Specifications

Interleaf EP1052 GENERAL, MECHANICAL/ELECTRICAL
96.11.01
M-5
1158SBM0400A
SEQUENTIAL EXPLANATION4
*Numbers given in rectangles in the following flowchart are timer values in sec.
Scanner Reference Position Sensor PC81
*If the Scanner is not at the home position, Scanner Motor
M5 is energized to move the Scanner to the home position.
A The power cord is plugged into the outlet.
Power cord is plugged in.
ON
ON
ON
Paper Dehumidifying
Heater H3
Drum Dehumidifying
Heater H2
DC24V for Drum heating (PU2)
Only when Serviceman
Switch S3 is ON
B Power Switch S1 is turned ON.
S1 ON
OFF
ON
H2
DC5V (PWB-C)
ON
DC24V (PU2)
ON
Control panel
ON
The Cooling Fan turns at full speed.
Approx. 3
The Cooling Fan turns at half speed.
Approx. 0.5
Fusing Heater Lamp H1
ON
ON
ON
Lens Reference Position Sensor PC90
*If the Lens is not at the home position, Lens Motor M6 is
energized to move the Lens to the home position.
ON
Mirror Reference Position Sensor PC86
*If the 4th Mirror is not at the home position, Mirror Motor M7
is energized to move the Mirror to the home position.
ON
Starter setup and ATDC Sensor automatic adjustment
*Only when the Imaging Unit is new. I/U Fuse F4 blows
when the starter setup sequence is completed normally.