Specifications

Interleaf EP1052 GENERAL, MECHANICAL/ELECTRICAL
96.11.01
M-16
Toner Empty Detection
The copier has no toner empty detecting sensor and, instead, the ATDC Sensor
performs that function. The ATDC Sensor checks the toner-to-carrier ratio and, if
it reads a T/C ratio lower than the set level for 37 copies and, further, if it next reads
a ratio 1% lower than the setting, this is a toner-empty condition. The toner-empty
condition is canceled after detection under any of the following conditions:
D The set T/C ratio has been recovered.
D After the Front Door has been swung open and closed.
Control Signal Set T/C
Standard
Output
Voltage
WIRING DIAGRAM
4.0% 2.692
4.5% 2.596
5.0% 2.5
UN3 PWB-A PJ1A-3 5.5% 2.404 30-B
6.0% 2.308
6.5% 2.212
7.0% 2.116