Specifications

Interleaf EP1052 GENERAL, MECHANICAL/ELECTRICAL
96.11.01
M-47
1158SBM1705A
17-5. Universal Tray Paper Size Detection
The length (feeding direction) and width (crosswise direction) of the paper are
independently detected and the copier determines the paper size by combining the
two separate detections made.
On the bottom of the tray are a lever fitted to the Trailing Edge Stop and another
lever fitted to the Edge Guide. These levers actuate and deactuate Paper Size
Detecting Switches S61, S62, S63, and S64 to allow the copier to determine a
particular paper size.
Marketing Area Switch S66 is used to set the type of paper to be used (inch or metric).
1151M003AA
S64
Drawer Set Detecting
Switch S65
S63
S62
S61
S66
NOTE
The number and the installed position of the
Paper Take-Up Rolls vary depending on the
marketing areas: inch or metric. See pp. M-43
for the sizes of the paper that can be taken up
and fed out of the drawer.
Paper Size Detecting Switches Inch/Metric Setting Switch S66
Length (FD) Width (CD)
Paper Length
S61 S62 S63 S64
Metric Inch
ON ON ON - ~402.0 A3 11”  17”
OFF 8-1/2”  14”
ON ON OFF
ON
402.0~349.2 B4
11”  14”
OFF 8-1/2”  14”
ON OFF OFF
ON
349.4~317.2 FLS
11”  14”
OFF OFF OFF - 317.2~272.0 A4L Letter L
OFF Letter L
OFF OFF ON
ON
272.0~222.0 B5L
Letter C
OFF A5L Invoice L
OFF ON ON
ON
222.0~195.0
A4L Letter C
OFF Letter C
OFF ON OFF
ON
195.0~ B5C
Letter L