Specifications

Interleaf EP1052 GENERAL, MECHANICAL/ELECTRICAL
96.11.01
M-50
1158SBM1708A
17-8. Paper Take-Up Roll
Since the Paper Lifting Plate is raised at all times by the Paper Lifting Springs, paper
is wedged in the mechanism when the Drawer is slid out of the copier if the Paper
Take-Up Roll is round in shape. So the Take-Up Roll is semicircular and the circular
part of the Roll is positioned on top at times other than take-up. For convenience,
we call this position of the Paper Take-Up Roll the ”retracted” position.
The Paper Take-Up Roll is grooved to keep good friction even under heavy loading.
The Paper Drawer, which is a universal type to accommodate paper of different
sizes, is provided with five (four in areas using only inch paper) Paper Take-Up
Rolls.
The Paper Take-Up Roll is driven when the Paper Take-Up Solenoid (SL2) is
energized. The Roll is turned one complete turn for each single sheet of paper.
The Paper Take-Up Sensor (PC55) is used to detect whether a sheet of paper has
been properly taken up or not.
Paper Take-Up Roll Ratchet
Paper Take-Up Solenoid
Ratchet
Paper Take-Up Sensor
Vertical Transport Roller
Actuator
1151M025AA