Specifications

Interleaf EP1052 GENERAL, MECHANICAL/ELECTRICAL
96.11.01
M-59
1151SBM2102A
21-2. Fusing Rollers Pressure Mechanism
Pressure Springs are installed at both ends of the Lower Fusing Roller. These
springs contact the bearings mounted on both ends of the Lower Fusing Roller and
exert pressure through the Lower Fusing Roller to the Upper Fusing Roller which
is installed in the Fusing Unit.
The Fusing Unit is divided into an upper and a lower half, and the upper half can
be swung open. The Upper Half of the copier, when locked in position, presses the
upper half of the Fusing Unit down onto its lower half.
Upper Copier Frame
Upper Fusing Roller
Lower Fusing Roller
Pressure Spring
1151SBM2103A
21-3. Oil Roller/Cleaning Roller
A felt-type silicone Oil Roller is pressed up against the Lower Fusing Roller by the
Torsion Springs fitted on the bushings on both ends of the Oil Roller. The Oil Roller
applies a coat of silicone oil to the surface of the Lower Fusing Roller. From there,
it is transferred to the surface of the Upper Fusing Roller to help prevent toner from
being melted onto the surface of the Upper Fusing Roller.
The Cleaning Roller is pressed against the surface of the Lower Fusing Roller, thus
assisting cleaning of the fusing rollers.
Upper Fusing Roller
Lower Fusing Roller
Oil Roller
Cleaning Roller
1151M008AA