Specifications

Interleaf EP1052 GENERAL, MECHANICAL/ELECTRICAL
96.11.01
M-62
1158SBM2400A
DEHUMIDIFYING SWITCH (OPTION)24
To prevent image transfer efficiency from being reduced due to damp paper in
highly humid weather, Paper Dehumidifying Heater H3 is installed on the base
frame of the copier under the Drawer.
While, Drum Dehumidifying Heater H2 is located under the Lower Synchronizing
Roller to prevent the PC Drum from forming condensation.
Lower Synchronizing
Roller
Drum
Dehumidifying
Heater H2
Serviceman
Switch S3
Paper Dehumidifying Heater H3
Paper Take-Up Rolls
Base frame
D H2, H3 ON/OFF Conditions
Serviceman Switch ON
Power cord Plugged in Power Switch ON *During a copy cycle
H2 ON OFF OFF
H3 ON ON OFF
*During a copy cycle: Refers to the period of time between when the Start Key is pressed
and when Main Drive Motor M2 is deenergized.